Performance Features:
1. Vacuum pumping, nitrogen filling and sealing are carried out in the sealed room, effectively preventing air from entering the tank twice;
2. The cans and milk powder cans of different specifications can be sealed by changing the gland mold, the body clamp, the lower cover and other accessories;
3. Joint control of tank cover: when there is a tank, cover it accordingly; no cover if there is no tank;
4. Stop without cover: when the lower cover is not covered, it will stop automatically to avoid biting the cover die and damaging the parts of the sealing mechanism;
5. Automatic control, controlled by Siemens PLC PLC and operated by Siemens HMI touch screen;
6. All pneumatic components and solenoid valves adopt the brand of "Yadeke";
7. High precision digital pressure sensor is adopted to detect the vacuum pressure, and the required vacuum pressure can be arbitrarily set;
8. Use high pressure vacuum pump to pump vacuum, which can reach very low vacuum degree;
9. Through function switching, vacuum and nitrogen filling can be realized;
10. Special hand cover of rotating machinery solves the problem that the lower cover of machinery is easy to scratch and the cover is rusted.
11. The cover feeding mechanism cannot drop the powder;
12. Stainless steel outsourcing.
13. Low pressure alarm, threshold alarm.
14. Cylinder jack mechanism.
A machine can adapt to tinplate cans by changing the mold model: 300# 307# 401# 502#.
Main parameters:
1. Production capacity: nitrogen-filled tank/min ≥12-14 vacuum tank/min ≥18-20 normal tank/min ≥22-24
2. Residual oxygen :(nitrogen filling mode) when the vacuum reaches -101kpa, the vacuum stays for 3 seconds ≤1.5%
3. Sealing station: 2
4. The applicable tank type: mm Φ tank diameter from 73 ~ 127 Φ (300 ~ 502) tank high 100 ~ 190 mm
5. Compressed gas consumption: 0.5 m3/min
6. Compressed gas requirements: 0.8 ~ 1.0mpa; 8 tracheal Φ
7. Nitrogen consumption (Max) : 0.3m3/min
8. Nitrogen requirements: 0.4 ~ 0.8mpa; 12 the trachea Φ
Vacuum pump: 2.2KW
10. Power requirement: three-phase five-wire system 380V/50HZ
