Automatic stacker unloader
(With buffer conveyor belt)
Summary:
The first step for empty cans and bottles to enter the assembly line is to disassemble the cans. Most of the traditional empty tank unstacking equipment only reaches the semi-automatic level, that is, the combination is not intensive enough, the function is not strong enough, a lot of manpower is needed to assist, and the operation is tedious, the error rate is high, the mechanical failure rate is high, so the overall efficiency of the equipment is low and the cost is high.
The automatic empty can unloader developed by our company solves the above problems and realizes true automation. Just put in the tank stamp and set the program, then a series of operations such as unstacking, on-line, interlayer cardboard, stack plate recycling and stacking can be completed synchronously. Save manpower, save site, reduce cost, greatly improve production efficiency.
Features:
1. High space utilization: double deck design.
2. High degree of automation: PLC computer program control, precise action; The tank stomp is sent to the stacking area manually with machine assisted positioning. Automatic unloading without tank, automatic stop and unloading alarm when full tank (upper buffer platform); Paper clapboard, empty tray manual assistance recycling, stacking; After discharging, the machine will automatically stop and alarm, or enter the next unpacking link.
3. Electrical components: Mitsubishi PLC of Japan, Dongyuan Servo, Schneider
Configuration:
1. Upper and lower two-layer belt conveyor device
2. Tank pushing and unloading device -- automatically push the tank to the upper buffer platform.
3. PLC program control system -- through the coordination with the photoelectric switch, automatic wiring and control all the actions.
Parameters:
1. Production capacity: about 10s/layer
2. Maximum detachable height: 1500mm.
3. Applicable pallets: 1300mm×1300mm or 1000mm×1200mm (length × width).
4. Suitable for canisters: pot diameter 50 ~ 153mm, pot height 50 ~ 200mm, iron canisters, plastic canisters, paper canisters, glass canisters.
5. Power data: 1.5KW
6. External dimension: 4500mm×2000mm×2700mm (length × width × height).
7. Overall weight: about 1200 kg.
8. Some parameters can be adjusted, and specific standards can be negotiated
