The repair and maintenance of powder packaging machine is to do a good job of lubrication:
(1) The tank part of the machine is equipped with an oil gauge. It should be refuelled once before starting the machine. During the process, it can be added according to the temperature rise and operation of each bearing.
(2) The worm gear box must store oil for a long time. The oil level is so high that the worm gear has all penetrated into the oil. If it is often used, the oil must be renewed every three months.
(3) When the machine is refueling, do not let the oil spill out of the cup, more do not flow to the machine around and on the ground. Because oil is easy to make material pollution, affect the quality of products.
Maintenance process and method of powder packaging machine:
1. Inspect the machine parts regularly, once a month, to check whether the worm gear, worm, bolts on the lubrication block, bearing and other active parts are flexible in rotation and wear, and repair the defects in time if found, and do not force them to be used.
2. The machine should be kept in a dry and clean room. It should not be used in places where there are acids and other corrosive gases in the atmosphere.
3. After the machine is used or stopped, the rotating drum should be taken out to clean and brush the residual powder in the bucket, and then installed, ready for the next use.
4, if the service time is long, the machine must be wiped clean, the smooth surface of the parts coated with anti-rust oil, with cloth cover.
Coffee powder filling machine, packaging factory in Shanghai, protein powder filling machine, powder packaging machine in Shanghai, Shanghai powder packing factory, Shanghai granule packing machine, powder filling machine in Shanghai, Shanghai liquid packaging factory, powder filling machine, powder quantitative packaging machine, powder packaging machine, powder packaging machine, packaging machine, powder packaging machine, powder packaging machine
